|
2011 Fazzt Race Team Vehicle Specs |
CHASIS
|
Type
|
Open-wheel, single-seat, open-cockpit and ground-effect underbody; outboard wings front and rear |
Construction
|
Monocoque contains cockpit, fuel cell and front suspension; engine is stressed (integral) member of chassis; rear assembly contains bellhousing, gearbox and rear suspension members |
Materials
|
Carbon fiber, kevlar and other composites |
Weight
|
1,565 pounds minimum for ovals and 1,630 pounds minimum for road courses, including lubricants and coolants. Does not include fuel or driver.
|
Length
|
192 inches minimum |
Width
|
78.5 inches maximum, 77.5 inches minimum (measured outside rim to rim) |
Height
|
Approximately 38 inches |
Wheelbase
|
121.5 inches to 122 inches |
Wheel Size
|
Front: 15 inches diameter, 10 inches wide.
Rear 15 inches diameter, 14 inches wide
|
Tires
|
Firestone Firehawk
Front diameter: 26 inches maximum, 25 inches minimum @ 35 psi
Rear diameter: 27.5 inches maximum, 26.5 inches minimum @ 35 psi
|
Gearbox
|
XTRAC (gears forward of rear axle) Six forward gears, Mega-Line Assisted Gear Shift (paddle-shift) |
Fuel Cell
|
Single, rupture-proof cell, 22 U.S. gallons (standard |
Manufacturer
|
Dallara Automobili, Italy |
ENGINE
|
Type
|
3.5-liter (183.07 cubic inches) V-8, 32-valve dual-overhead cam (DOHC), Normally aspirated (no turbocharger), Max. bore diameter 93 millimeters, 4 camshafts, 4 valves per cylinder
|
Weight
|
Minimum weight is 280 pounds - No headers, clutch, ECU, spark box or filters. |
RPM
|
10,300 maximum (League-supplied rev limiter) |
Power
|
Estimated 650 horsepower |
Fuel
|
100 percent fuel-grade ethanol |
Injector
|
Electronic |
Models
|
Honda Racing Indy V-8 |
Manufacturer
|
American Honda Motor Co., Inc. |
|